French Cleat Battery Organizer
Never lose track of your batteries again!
The Neat French Cleat Battery holder keeps your AAA, AA, C, D, and rectangular 9V batteries neatly stored, fully visible, and always ready for action.
Designed for modular French cleat walls, this space-saving dispenser uses 30mm Shadowfoam or Kaizen Foam to securely nest your batteries for easy access without rattling or slipping.
✅ Holds AAA, AA, C, D, and 9V batteries
✅ Built with 30mm Shadowfoam or Kaizen Foam for a snug, secure fit
✅ Quick access and easy inventory at a glance
✅ Clean, modular design matches the Neat French Cleat system
✅ Save time hunting for batteries when you need them most
✅ Ideal for workshops, hobby rooms, and homes
This sleek organizer mounts securely onto your French cleat wall and features precision laser-cut construction.
No more rummaging through drawers or bins — every battery has its place, neatly protected in foam!
Key Features
- Fits multiple battery types: AAA, AA, C, D, and rectangular 9V
- Uses 30mm Shadowfoam or Kaizen Foam: Perfect cushioning and hold for each battery
- Compact footprint: Maximize wall space without clutter
- Easy access: Grab the battery you need instantly
- Custom design: Matches all Neat French Cleat modular accessories
- Laser-cut precision: Tight, secure, and satisfying fit
- Expandable: Mount multiple organizers side-by-side for even more storage
What’s Included
- Digital plans for the French cleat-mounted battery organizer
- Assembly guide with cutting tips for best results
Good to Know
- This is a digital product — no physical item will be shipped.
- Designed for laser cutting from 6mm plywood (or similar material).
- Requires 30mm Shadowfoam or Kaizen Foam for optimal function (not included).
Tidy your power supply the Neat French Cleat way — and stay charged for every project. 🔋
Materials Needed for this French Cleat Battery Dispenser
- 6mm or 1/4″ plywood
- 30mm foam
- Wood glue or CA glue
- Spray varnish (optional for finish)
Assembly Notes:
The imperial dimensions are approximately 16 1/4 inches high x 11 1/4 inches wide.
Instructions are provided to accommodate laser beds smaller than the design size, ensuring compatibility with various equipment.
What you’ll get
You’ll get the following,
Files
DXF file(s) (.dxf) for 6mm plywood
LightBurn File(s) (.lbrn2) for 6mm plywood
SVG file(s) for 6mm plywood
Notes
Assembly notes/instructions if required
Video guides on laser cutting and Neat French Cleat assembly
What you’ll need
A laser that can cut 6mm OR 1/4″ ply
Some 6mm plywood OR 1/4″ plywood
30mm foam
Spray varnish (optional but recommended)
Wood glue or CA glue
Terms of use
- • Sales are non-refundable and non-returnable.
- • Downloaded orders are non-refundable and non-returnable.
- • These files are for personal use only.
- . No commercial use of these files in permitted. No purchasing these files to make and sell a finished product.
- • These files are not to be shared or distributed via any physical or digital methods.
About the designer
My workshop
How It All Started
I built my workshop during the first lockdown in 2020. Before that, it was just a brick-walled outbuilding that used to house pigs! While the workshop isn’t very large—roughly the size of a double garage—it’s a space that works hard. One unique challenge is the chimney right in the middle, which limits the layout. Although I considered removing it, the chimney is essential for the wood burner, which is the only source of heating in the workshop.
The Tools I Use
My workshop is equipped with two lasers:
- Sculpfun S9: A diode laser with 10W power, perfect for smaller projects.
- Gweike Cloud: A 50W CO2 laser that I use to create my French cleats. (I started with the Sculpfun, but it takes much longer compared to the Gweike.)
I also rely on:
- Festool CMS Table Saw for precision cutting.
- Bosch GCM Mitre Saw for accurate angles.
- An old pillar drill, which still gets the job done!
- A Creality Ender 3 3D Printer, which I use for smaller custom parts and prototypes.
For creating my plans and models, I use Shapr3D on an iPad Pro. To control the lasers, I work with Lightburn, which offers precision and flexibility for my designs.
Let’s Collaborate
If you have any questions, special requests, or ideas, feel free to leave a comment below. I’d love to hear from you and explore ways to improve or expand the Neat French Cleat System.
Why Choose the Neat French Cleat System?
With the Neat French Cleat System, you’re investing in more than just storage—you’re choosing quality, efficiency, and a tidy workspace. It’s the perfect solution for tool enthusiasts looking to elevate their organization and productivity.
More French Cleat Essentials for Your Workshop
Take your workspace to the next level with our innovative range of French cleats and versatile shelving solutions.
From unique tool holders to durable storage options, every design is built for efficiency and style.
Find the perfect additions to customize your modular system and keep your tools and supplies within easy reach.
My Laser
A Gweike Cloud 50W
I rely on my Gweike Cloud 50W laser, a powerful and versatile tool that’s perfect for precision cutting and engraving. With its user-friendly design, this laser effortlessly handles everything from intricate tool holders to larger cleat systems. Its speed, accuracy, and ability to work with various materials make it an essential part of my workshop, ensuring that every custom French cleat and component is perfectly cut.
