0
Your Cart
0
Your Cart
3D render of a Neat French Cleat System featuring the 138 x 366 mm Half Shelf Set. The unit includes a wide, flat plywood shelf supported by curved side panels and a large upper wallboard, all constructed with precise interlocking box joints. Text at the top reads Neat French Cleat System, with the size labeled below the shelf. Designed for organizing tools and supplies in a modular workshop setup. Keywords: French cleat system, 138 x 366 half shelf, laser-cut plywood, workshop storage solution, modular wall organization.

138 x 366 Half Shelf and Half Wallboard Set

£4.00

Make room for more with the 138 x 366 French Cleat Half Shelf Set! This wide-format design offers generous shelf space and a customizable wall panel—perfect for organizing larger tools. Includes laser-cut files for instant download.

-Decrease product quantity. +Increase product quantity.
Category:

French Cleat 138 x 366 Half Shelf & Wall Panel – Big Storage in a Streamlined Design

Get more from your cleat wall with the 138mm x 366mm Half Shelf Set. With a wide, sturdy shelf and an upper wallboard ready for customization, this set is perfect for keeping your larger tools, parts, or grouped items neat and within easy reach.

Why It’s a Great Fit:

✔ Extra Width for More Storage – Ideal for larger items or clusters of frequently used tools.
✔ Bench-Side Convenience – Mount above your workbench for fast access without workspace clutter.
✔ Modular Match-Up – Built to fit seamlessly with our 282mm high cleat range for consistent layout.
✔ Scales with Your Needs – Use on its own or pair with other cleats to expand your system as your workshop grows.

Spacious. Functional. Made for Everyday Efficiency.

Perfect for anyone looking to streamline their setup without compromising on space or style.

🔹 Includes ready-to-cut laser files – start organizing right away!

138 x 366 Half Shelf and Wall Panel Set

What you’ll get

You’ll get the following, Files DXF file(s) (.dxf) for 6mm plywood LightBurn File(s) (.lbrn2) for 6mm plywood SVG file(s) for 6mm plywood Notes Assembly notes/instructions if required
DXF
SVG

What you’ll need

A laser that can cut 6mm OR 1/4″ ply Some 6mm plywood OR 1/4″ plywood 6mm or 1/4″ dowels for aligning parts A drill for drilling 6mm or 1/4″ holes Spray varnish (optional but recommended) Wood glue or CA glue

Terms of use

  • • Sales are non-refundable and non-returnable.
  • • Downloaded orders are non-refundable and non-returnable.
  • • These files are for personal use only.
  • . No commercial use of these files in permitted. No purchasing these files to make and sell a finished product.
  • • These files are not to be shared or distributed via any physical or digital methods.

About the designer

About the Designer Hi, my name is Alan Egan and I’m a trained mechanical engineer. I used to design jigs, fixtures, progression tools, and manufacturing robots. These days, I spend a lot of time in my workshop and I love making stuff and I love French cleats as they keep my space organized.But, like everyone else, when I needed a cleat I grabbed a few pieces of scrap wood and made a cleat, ad-hock with no thought about spacings, or size, or the cleats that I’d made before. Then I came up with the idea for a French cleat system and the Neat French Cleat System was born. I then started prototyping, and what you see here is the result of a ton of tried and tested ideas.

My workshop

How It All Started I built my workshop during the first lockdown in 2020. Before that, it was just a brick-walled outbuilding that used to house pigs! While the workshop isn’t very large—roughly the size of a double garage—it’s a space that works hard. One unique challenge is the chimney right in the middle, which limits the layout. Although I considered removing it, the chimney is essential for the wood burner, which is the only source of heating in the workshop.
The Tools I Use My workshop is equipped with two lasers:
  • Sculpfun S9: A diode laser with 10W power, perfect for smaller projects.
  • Gweike Cloud: A 50W CO2 laser that I use to create my French cleats. (I started with the Sculpfun, but it takes much longer compared to the Gweike.)
I also rely on:
  • Festool CMS Table Saw for precision cutting.
  • Bosch GCM Mitre Saw for accurate angles.
  • An old pillar drill, which still gets the job done!
  • A Creality Ender 3 3D Printer, which I use for smaller custom parts and prototypes.
For creating my plans and models, I use Shapr3D on an iPad Pro. To control the lasers, I work with Lightburn, which offers precision and flexibility for my designs.
Let’s Collaborate If you have any questions, special requests, or ideas, feel free to leave a comment below. I’d love to hear from you and explore ways to improve or expand the Neat French Cleat System.
Why Choose the Neat French Cleat System? With the Neat French Cleat System, you’re investing in more than just storage—you’re choosing quality, efficiency, and a tidy workspace. It’s the perfect solution for tool enthusiasts looking to elevate their organization and productivity.

My Laser

A Gweike Cloud 50W

I rely on my Gweike Cloud 50W laser, a powerful and versatile tool that’s perfect for precision cutting and engraving. With its user-friendly design, this laser effortlessly handles everything from intricate tool holders to larger cleat systems. Its speed, accuracy, and ability to work with various materials make it an essential part of my workshop, ensuring that every custom French cleat and component is perfectly cut.

A modern Gweike Cloud 50w Laser cutting machine with a sleek white and black design, open to display its workspace. The device features a Wi-Fi icon, indicating wireless connectivity. The machine has a glossy surface, precise controls, and a compact design suitable for workshops or small businesses.

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Related products